Labelmate MINI-CAT MC-10 Labelmate MINI-CAT MC-10, rewinder inexpensive and paster, coreless or core 76 mm standard. Bidirectional with multiple rewinding force / unrolling.
* The information indicated below is generic for all models. Not all references include all the characteristics indicated.
Labelmate MINI-CAT MC-10 Labelmate MINI-CAT MC-10, rewinder inexpensive and paster, coreless or core 76 mm standard. Bidirectional with multiple rewinding force / unrolling.
The MINI-CAT rewinders labels (MC) are the rewinders labels under more popular the world price. They are able to rewind rolls of labels up to 125 mm wide (115 mm for MC-11) to 220 mm in diameter at speeds up to 50 cm / sec. The MC-10 has a core support 76 mm in diameter. You can also use the function including "coreless rewinding" to rewind directly on the shaft. The MC-11 includes an adjustable support core precision is set in seconds to accept any core diameter of 25-101 mm. Both MINI-CAT using proprietary technology Constant Adjustable Torquet ( "CAT") of LABELMATE to achieve an impressive and reliable performance at an unprecedented low price. A special motor, designed specifically for MINI-CAT offers bi-directional operation and trouble-free performance. A breaker (power supply) conveniently controls the amount of force Rewind. No belts or problematic clutches are used and no speed adjustments are required.
The MINI-CAT automatically adjusts to any printer speed up to 50 cm / sec and even allows automatic feedback tag if your printer requires.
MINI-CAT have a tab label to keep aligned inside the belt edge labels as the labels are rewound. Also available is a guide optional adjustable paper (APG-MC) to the outer edge of the labels is mounted directly on the motherboard MC-10 or MC-11 and guide. For MC-10 is also available an external flange optional plastic (MC-10 2ndFlange).
New option external control
The choice of external control enables the printer check the rewinding. Several printer manufacturers now offer the necessary signal as standard, where previously an expensive board I / O required Ideally, the printer will activate only when you print or forward rewinder. Due to the unique technology of direct drive motor used, this scheme allows the retroalimente printer without resistance rewinder.
Steel construction resistant allows your MINI-CAT simply snaps into place near your label printer. Special slip feet keep the unit from moving. Make MINI-CAT LABELMATE work for you today and enjoy a new dimension in convenience and reliability of rewinding labels.
https://www.etiden.com/EN/label-rewinder-labelmate-lmr001-76.html1370Labelmate Label Rewinder - MC-10 76mm <p> Labelmate MINI-CAT MC-10 Labelmate MINI-CAT MC-10, rewinder inexpensive and paster, coreless or core 76 mm standard. Bidirectional with multiple rewinding force / unrolling. </p> <p> The MINI-CAT rewinders labels (MC) are the rewinders labels under more popular the world price. They are able to rewind rolls of labels up to 125 mm wide (115 mm for MC-11) to 220 mm in diameter at speeds up to 50 cm / sec. The MC-10 has a core support 76 mm in diameter. You can also use the function including "coreless rewinding" to rewind directly on the shaft. The MC-11 includes an adjustable support core precision is set in seconds to accept any core diameter of 25-101 mm. <br> Both MINI-CAT using proprietary technology Constant Adjustable Torquet ( "CAT") of LABELMATE to achieve an impressive and reliable performance at an unprecedented low price. A special motor, designed specifically for MINI-CAT offers bi-directional operation and trouble-free performance. A breaker (power supply) conveniently controls the amount of force Rewind. No belts or problematic clutches are used and no speed adjustments are required. </p> <p> The MINI-CAT automatically adjusts to any printer speed up to 50 cm / sec and even allows automatic feedback tag if your printer requires. </p> <p> MINI-CAT have a tab label to keep aligned inside the belt edge labels as the labels are rewound. Also available is a guide optional adjustable paper (APG-MC) to the outer edge of the labels is mounted directly on the motherboard MC-10 or MC-11 and guide. For MC-10 is also available an external flange optional plastic (MC-10 2ndFlange). </p> <p> New option external control </p> <p> The choice of external control enables the printer check the rewinding. Several printer manufacturers now offer the necessary signal as standard, where previously an expensive board I / O required Ideally, the printer will activate only when you print or forward rewinder. Due to the unique technology of direct drive motor used, this scheme allows the retroalimente printer without resistance rewinder. </p> <p> Steel construction resistant allows your MINI-CAT simply snaps into place near your label printer. Special slip feet keep the unit from moving. Make MINI-CAT LABELMATE work for you today and enjoy a new dimension in convenience and reliability of rewinding labels. </p> <p> <br> </p> <p>https://www.etiden.com/media/catalog/product/cache/8e0900980d802d9bb649187a089d520a/r/e/rebobinador-de-etiquetas-labelmate-mc-10-76mm_5_3.jpg374.1instock430374.11355.9Labelmate000https://www.etiden.com/media/catalog/product/r/e/rebobinador-de-etiquetas-labelmate-mc-10-76mm_5_3.jpg/Rewinder Labelmate/Labelmate Label Dispenser2020-11-16T08:13:50+0000
