* The information indicated below is generic for all models. Not all references include all the characteristics indicated.
The new unwind/rewind system for Epson C4000 labels The printer can handle media up to 127 mm (5") wide and unwind/ rewind label rolls with an outer diameter of up to 250 mm (9.84”). Units are equipped with a 3" or 40 adjustable center support to 118mm (1.57” - 4.64”). To ensure an aligned paper path in the system, the printer The board is available to connect the rewinder and unwinder. It also offers a custom sliding support to lean on and fix the Epson printer.
An external power supply 100/240VAC - 2.5A at 24V allows an electronic circuit to provide, through the tensioner arm, the adjustment of the rotation speed and the direction of rotation. A 2A fuse is used for protection.
LABEL REWINDER The tension arm position is calibrated as follows: - When the printer feeds the paper for printing, the tension arm turns off and the device rewinds the media. - When the tension arm is in the middle position, the device is inactive. - When the printer removes the paper, the tension arm goes up and the device unrolls it.
https://www.etiden.com/EN/label-unwinder-rewinder-for-epson-c4000-printers-1.html36983label rewinder for Epson C4000 printers<p>The new unwind/rewind system for Epson C4000 labels<br />The printer can handle media up to 127 mm (5") wide and unwind/<br />rewind label rolls with an outer diameter of up to 250 mm (9.84”).<br />Units are equipped with a 3" or 40 adjustable center support<br />to 118mm (1.57” - 4.64”).<br />To ensure an aligned paper path in the system, the printer<br />The board is available to connect the rewinder and unwinder.<br />It also offers a custom sliding support to lean on and fix<br />the Epson printer.</p>
<p>An external power supply 100/240VAC - 2.5A at 24V allows an electronic circuit to provide, through the tensioner arm, the adjustment of the rotation speed and the direction of rotation. A 2A fuse is used for protection.</p>
<p> </p>
<p>LABEL REWINDER<br />The tension arm position is calibrated as follows:<br />- When the printer feeds the paper for printing, the tension arm<br />turns off and the device rewinds the media.<br />- When the tension arm is in the middle position, the device is inactive.<br />- When the printer removes the paper, the tension arm goes up and<br />the device unrolls it.</p>https://www.etiden.com/media/catalog/product/cache/8e0900980d802d9bb649187a089d520a/a/s/asd1111-s0_ml.gif339.63instock442339.6323102.37DPR000https://www.etiden.com/media/catalog/product/a/s/asd1111-s0_ml.gif2022-12-14T15:29:56+0000
