* The information indicated below is generic for all models. Not all references include all the characteristics indicated.
The new unwind/rewind system for Epson C4000 labels The printer can handle media up to 127 mm (5") wide and unwind/ rewind label rolls with an outer diameter of up to 250 mm (9.84”). Units are equipped with a 3" or 40 adjustable center support to 118mm (1.57” - 4.64”). To ensure an aligned paper path in the system, the printer The board is available to connect the rewinder and unwinder. It also offers a custom sliding support to lean on and fix the Epson printer.
An external power supply 100/240VAC - 2.5A at 24V allows an electronic circuit to provide, through the tensioner arm, the adjustment of the rotation speed and the direction of rotation. A 2A fuse is used for protection.
LABEL UNWINDER The tension arm position is calibrated as follows: - When the printer feeds the paper for printing, the tension arm goes up and the device unrolls the media. - When the tension arm is in the middle position, the device is inactive. - When the printer removes the paper, the tension arm goes down and the device rewinds it.
https://www.etiden.com/EN/label-unwinder-rewinder-for-epson-c4000-printers.html36982label unwinder for Epson C4000 printers<p>The new unwind/rewind system for Epson C4000 labels<br />The printer can handle media up to 127 mm (5") wide and unwind/<br />rewind label rolls with an outer diameter of up to 250 mm (9.84”).<br />Units are equipped with a 3" or 40 adjustable center support<br />to 118mm (1.57” - 4.64”).<br />To ensure an aligned paper path in the system, the printer<br />The board is available to connect the rewinder and unwinder.<br />It also offers a custom sliding support to lean on and fix<br />the Epson printer.</p>
<p>An external power supply 100/240VAC - 2.5A at 24V allows an electronic circuit to provide, through the tensioner arm, the adjustment of the rotation speed and the direction of rotation. A 2A fuse is used for protection.</p>
<p>LABEL UNWINDER<br />The tension arm position is calibrated as follows:<br />- When the printer feeds the paper for printing, the tension arm<br />goes up and the device unrolls the media.<br />- When the tension arm is in the middle position, the device is inactive.<br />- When the printer removes the paper, the tension arm goes down<br />and the device rewinds it.</p>
<p> </p>https://www.etiden.com/media/catalog/product/cache/8e0900980d802d9bb649187a089d520a/a/s/ass1111-s0_ml.gif339.63instock442339.6323102.37DPR000https://www.etiden.com/media/catalog/product/a/s/ass1111-s0_ml.gif2022-12-14T13:25:23+0000
